Shot Blasting Machines

The ActOn Powertrack Junior is a Mobile Abrasive Blast System, designed to allow customer to easily blast in different locations. Built for metal and stone blasting applications, this blasting equipment is suitable for blasting inside and outside corners.

ActOn Powertrack is an economical and mobile blast solution, which can be used with different types of fine-grained media. The ergonomic design and the application of advanced parts in a compact construction guarantees a perfect system.

The ActOn Mobile Blasting Room includes a mobile blast container and the LP2500 unit. After a quick installation, you can start blasting without the need for additional structures.

The AWB is our economical wet blast cabinet designed for easy operation in sitting or standing position, for cleaning, descaling, deburring, roughening, grease removal, die cleaning.

The ECO Blasting Series is our economical range of Suction Blast and Pressure Blast machines. These machines will allow you to minimise your investment while enjoying the benefits of a good quality shot blasting machine. 

Part of the ActOn Premium Series, the DI Suction Blasting machine is equipped with a cyclone, which guarantees that the abrasive is cleaned perfectly. The suction blast pistol ensures a constant optimum mix of pressurised air and abrasive, to offer an effective and efficient blasting process. 

For an effective and efficient blast process we recommend the DP Pressure Blasting machine. It includes a pressure pot equipped with a dosage cylinder, which always ensures the right mix of abrasive and pressurised air. Also, the dosage cylinder controls a constant flow of an abrasive, even at the start of the blast process.

The NP Wet Blasting cabinets are equipped with a special pump that achieves a constant flow of blast media and water to the blast nozzle. The media and water is mixed with pressurised air to add extra power and speed to the mix. The result is a very smooth finished component.

The AM Blasting series has been developed for de-powdering, shot peening and smooth finishing of 3D printed metal and polymer components. These cabinets can be used for a wide range of parts: from small to large components, to individual or large batches of additive manufactured pieces.

Using the electro shot blasting technology, DLyte eBlast machine is perfect for surface finishing parts with intricate shapes and for achieving a mirror finish in a short period of time. 

The NF range includes the NF-MI9 and NF-MP9 sandblasting cabinets, specifically built for effortlessly sandblasting small components, for industries like aerospace, maintenance and more. 

The Automated Shot Blasting equipment reduces manual handling and ensures a consistent process. Our blast systems are operator friendly, and can be custom built to suit your needs. 

The Automated Wet Blasting machine is designed for blasting of shafts prior to coating. The system consists of two blasting lines which can blast up to 70mm Ø shafts. Parts travel through the blast chamber and then enter the water wash chamber to remove any residue that may be on the components. The parts are then air dried before exiting.

At ActOn we offer a range of Wheel Blast Systems to help you achieve the surface finish you need, including descaling, removal of corrosion or rust, paint stripping, de-flashing,  achieving a smooth finish, shot peening, polishing and surface preparation prior to coating.